3. Align the screw holes on the I/O bracket with the screw holes on the chassis. Replace the four screws that secure the I/O bracket to the chassis.
4. Replace the back cover (see
5. Replace the display bezel (see
6. Replace the speaker cover (see
7. Replace the decorative cover (see
8. Replace the optical drive (see
9. Replace the computer stand (see
10. Replace the I/O cover (see
Replacing the I/O
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
11. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
Replacing the Back
Cover).
Replacing the Display
Bezel).
Replacing the Speaker
Cover).
Replacing the Decorative
Cover).
Replacing the Optical
Drive).
Replacing the Computer
Stand).
Cover).