1
heat-sink fans (2)
Replacing the Heat-Sink Fans
1. Follow the procedures in
Before You
2. Align the screw holes on the heat-sink fans with the screw holes on the chassis. Replace the four screws that secure the heat-sink fans to the chassis.
3. Route the heat-sink fan cables through the routing guides on the chassis.
4. Connect the heat-sink fan cables to the connectors on the system board.
5. Replace the processor heat sink (see
6. Replace the system-board shield (see
7. Replace the inverter (see
Replacing the
8. Replace the I/O bracket (see
9. Replace the back cover (see
10. Replace the display bezel (see
11. Replace the speaker cover (see
12. Replace the decorative cover (see
13. Replace the optical drive (see
14. Replace the computer stand (see
15. Replace the I/O cover (see
Replacing the I/O
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
16. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
2
screws (4)
Begin.
Replacing the Processor Heat
Replacing the System-Board
Inverter).
Replacing the I/O
Bracket).
Replacing the Back
Cover).
Replacing the Display
Bezel).
Replacing the Speaker
Cover).
Replacing the Decorative
Cover).
Replacing the Optical
Drive).
Replacing the Computer
Stand).
Cover).
Sink).
Shield).