1. Manuals
  2. Brands
  3. Dell Manuals
  4. Desktop
  5. Studio One 19/1909
  6. Service manual

Dell Studio One 19/1909 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Dell Studio One 19/1909 Service Manual
Technical Overview
Before You Begin
Computer Cover
Shield
Microphone
Stand
Memory Module(s)
Back I/O Panel
 Notes, Cautions, and Warnings
NOTE:
A NOTE indicates important information that helps you make better use of your computer.
CAUTION:
WARNING:
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft, Windows, Windows Vista, a n d Windows Vista start button logo are either trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model MTF
March 2009   Rev. A00
Great user manuals database on
A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
A WARNING indicates a potential for property damage, personal injury, or death.
UserManuals.info
Processor Fan and Heat Sink
Processor
Speakers
Drives
Cards
Inverter
System Fan and Heat Sink Assembly
Side I/O Panel
Power Supply Unit
Battery
System Board
Support Assembly
Webcam
System Setup

Advertisement

Table of Contents
loading

Related Manuals for Dell Studio One 19/1909

Summary of Contents for Dell Studio One 19/1909

  • Page 1 Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft, Windows, Windows Vista, a n d Windows Vista start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

  • Page 2: Before You Begin

    The procedures in this document may require the following tools:  Small Phillips screwdriver  Hex nut driver  Flash BIOS update program CD  Flash BIOS executable update program on the Dell Support website at support.dell.com  Turning Off Your Computer   CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.
  • Page 3 2. Turn off your computer (see Turning Off Your Computer).   CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.   3. Disconnect all telephone or network cables from the computer.  ...

  • Page 4: Removing The Wlan Card

      Replacing the RF Module   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the WLAN Card   1. Follow the instructions in Before You Begin.

  • Page 5: Removing The Rf Module

     Removing the RF Module   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   1. Follow the instructions in Before You Begin.
  • Page 6   3. Flip the RF module and align the screw hole on the RF module with the screw hole on the chassis.   4. Replace the screw that secures the RF module.   5. Replace the optical drive (see Replacing the Optical Drive).

  • Page 7: Removing The Battery

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   WARNING: A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer.

  • Page 8: Replacing The Battery

     Replacing the Battery   1. Follow the procedures in Before You Begin.   2. Insert the new battery into the socket with the side labeled "+" facing up and then snap the battery into place.   3. Reconnect the cables to the connectors HDD_POWER and SATA_1 (see System Board Components).

  • Page 9: Removing The Computer Cover

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
  • Page 10 Back to Contents Page   Great user manuals database on UserManuals.info...

  • Page 11: Support Assembly

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the computer stand).
  • Page 12 touch pad cable LVDS cable touch panel cable LCD panel  Replacing the Support Assembly   1. Follow the instructions in Before You Begin.   2. Reconnect the following cables to the LCD panel:  LVDS cable from LVDS connector  touch pad cable from the touch pad connector  touch panel cable from the touch panel module  ...

  • Page 13: Removing The Hard Drive

      Replacing the Optical Drive WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Hard Drive   1. Follow the procedures in Before You Begin.

  • Page 14: Replacing The Hard Drive

    hard drive screws (4) hard drive carrier      Replacing the Hard Drive   1. Follow the procedures in Before You Begin.   2. Prepare the new hard drive for installation and check the documentation that accompanied the drive to verify that the drive is configured for your computer.

  • Page 15: Replacing The Optical Drive

    optical drive data cable optical drive power cable optical drive connector screws (3)   10. Remove the four screws securing the optical drive to the optical drive carrier.   11. Slide the optical drive out of the optical drive carrier. optical drive carrier screws (4)  Replacing the Optical Drive...
  • Page 16 9. Replace the back I/O panel (see Replacing the Back I/O Panel).   10. Replace the stand (see Replacing the Stand).   11. Replace the shield (see Replacing the Shield).   12. Replace the computer cover (see Replacing the Computer Cover).

  • Page 17: Processor Fan And Heat Sink

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   WARNING: The heat sink may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it.

  • Page 18: Removing The Processor Fan

      CAUTION: Incorrect alignment of the processor heat sink can cause damage to the system board and processor.   1. Follow the procedures in Before You Begin. NOTE: The original thermal grease can be reused if the original processor and processor heat sink are reinstalled together. If either the processor or the processor heat sink is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is achieved.

  • Page 19: Replacing The Processor Fan

    6. Lift the processor fan away from the computer and place it in a secure location.  Replacing the Processor Fan   1. Follow the procedures in Before You Begin.   2. Connect the processor fan cable to the connector (CPU_FAN1) on the system board.  ...

  • Page 20: Removing The Inverter

      Replacing the Inverter   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Inverter   1. Follow the procedures in Before You Begin.

  • Page 21: Replacing The Inverter

     Replacing the Inverter   1. Follow the procedures in Before You Begin.   2. To replace the inverter, connect the two cables from the LCD panel to the inverter.   3. Connect the inverter cable to the system board connector (INVERTER).  ...
  • Page 22   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Back I/O Panel   1. Follow the procedures in Before You Begin.
  • Page 23   6. Replace the computer cover (see Replacing the Computer Cover).   7. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page   Great user manuals database on UserManuals.info...

  • Page 24: Removing Memory Modules

      Replacing Memory Module(s)   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing Memory Module(s)   1. Follow the procedures in Before You Begin.
  • Page 25 10. Check the amount of memory (RAM) listed. Back to Contents Page   Great user manuals database on UserManuals.info...

  • Page 26: Removing The Microphone

      Replacing the Microphone   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Microphone   1. Follow the procedures in Before You Begin.

  • Page 27: Removing The Processor

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: Do not perform the following steps unless you are familiar with hardware removal and replacement. Performing these steps incorrectly could damage your system board.

  • Page 28: Replacing The Processor

     Replacing the Processor   1. Follow the procedures in Before You Begin.   2. Lift the release lever to the release position so that the socket is ready for the new processor.   CAUTION: Ground yourself by touching an unpainted metal surface or the computer stand.  ...
  • Page 29   11. Apply the new thermal grease to the top of the processor.   CAUTION: Ensure that the processor heat sink is correctly seated and secure.   12. Replace the processor heat sink (see Replacing the Heat Sink).   13. Replace the back I/O panel (see Replacing the Back I/O Panel).

  • Page 30: Removing The Power Supply Unit

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   WARNING: To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your computer from the electrical outlet before removing the computer cover.

  • Page 31: Replacing The Power Supply Unit

     Replacing the Power Supply Unit   1. Follow the procedures in Before You Begin.   2. Replace the four screws that secure the power supply unit to the chassis.   3. Connect the power supply unit cable to the connector (ATX_POWER1) on the system board.  ...

  • Page 32: Replacing The Shield

      Replacing the Shield   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Shield   1. Follow the procedures in Before You Begin.

  • Page 33: Side I/O Panel

      Replacing the Side I/O Panel WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Side I/O Panel   1. Follow the procedures in Before You Begin.
  • Page 34 screw connector (F_AUDIO) connector (SIDE_BOARD_1)      Replacing the Side I/O Panel   1. Follow the procedures in Before You Begin.   2. To replace the side I/O panel, route the cables back into position and connect them to the connectors (F_AUDIO and SIDE_BOARD_1) on the system board.
  • Page 35   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Right Speaker NOTE: To locate the right speaker, see Inside View of Your Studio One.
  • Page 36 2. To replace the speaker, route the speaker cables back into position.   3. Connect the right speaker cable to the connector (SPEAKER_2) on the system board.   4. Place the speaker in position and replace the four screws that secure the speaker to the chassis.  ...
  • Page 37   3. Reconnect the left speaker cable to the connector (SPEAKER_1) on the system board.   4. Replace the four screws that secure the speaker to the chassis.   5. Replace the shield (see Replacing the Shield).   6. Replace the computer cover (see Replacing the Computer Cover).

  • Page 38: Removing The Stand

      Replacing the Stand   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Removing the Stand   1. Follow the procedures in Before You Begin.
  • Page 39   Great user manuals database on UserManuals.info...

  • Page 40: Removing The System Board

      Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at ww.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the stand).

  • Page 41: Replacing The System Board

    screws (5) M2.5 x 5-mm screws (5)   11. Lift the system board out of the chassis.  Replacing the System Board   1. Follow the instructions in Before You Begin.   2. To replace the system board place the system board back in the chassis.  ...
  • Page 42   WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   WARNING: Do not touch the fan when the computer is powered on.
  • Page 43 heat sink captive screws (2) system fan screws (3) system fan cable       10. Lift the assembly away from the system board and place it in a secure location.  Replacing the System Fan and Heat Sink Assembly   1.
  • Page 44 Back to Contents Page   System Setup Dell Studio One 19/1909 Service Manual   Overview   Clearing Forgotten Passwords   Clearing CMOS Settings   Flashing the BIOS  Overview Use system setup to:  Change the system configuration information after you add, change, or remove any hardware in your computer  Set or change a user-selectable option such as the user password...
  • Page 45 Displays the processor L2 cache size. Processor L2 Cache Indicates the amount of installed memory in MB. Memory Installed Indicates the amount of memory available in MB. Memory Available Indicates the memory speed in MHz. Memory Speed   Standard CMOS Features Displays current time in hh:mm:ss format.

  • Page 46: Clearing Forgotten Passwords

    Changing Boot Sequence for the Current Boot You can use this feature to change the current boot sequence, for example, to boot from the CD/DVD drive to run the Dell Diagnostics on the Drivers and Utilities media. On completion of diagnostic tests, the previous boot sequence is restored.

  • Page 47: Clearing Cmos Settings

      6. Remove the 2-pin jumper plug from pins 2 and 3 and fix it on pins 1 and 2.   7. Wait for approximately five seconds to clear the password setting.   8. Remove the 2-pin jumper plug from pins 1 and 2 and replace it on pins 2 and 3.  ...

  • Page 48: Flashing The Bios

    2. Locate the BIOS update file for your computer at the Dell Support website at support.dell.com. NOTE: For non U.S. regions, choose your country/region from the drop-down list at the bottom of the Dell support website and then locate the BIOS update file for your computer.
  • Page 49   8. Double-click the file icon on the desktop and follow the instructions on the screen.   Flashing the BIOS From a CD   1. Turn on the computer NOTE: If you use a BIOS upgrade CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.  ...

  • Page 50: Technical Overview

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.  Inside View of Your Studio One processor fan back I/O panel...
  • Page 51 RF connector (RF_1) 10 CMOS jumper (CLR_CMOS) 11 processor 12 processor fan connector (CPU_FAN1) 13 right speaker connector 14 memory module connector (SPEAKER_2) (SODIMM1) 15 memory module connector 16 webcam connector (WEBCAM) (SODIMM2)   17 digital microphone connector 18 left speaker connector (DIGITAL_MIC) (SPEAKER_1) 19 WLAN connector (WLAN)
  • Page 52 Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft, Windows, Windows Vista, a n d Windows Vista start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

  • Page 53: Removing The Webcam

      WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.   CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the computer stand).

This manual is also suitable for:

Mtf

Table of Contents