1. Follow the procedures in
Before You
2. Replace the system-board shield by using the securing clips that secure the tabs on the system-board shield.
3. Replace the three screws that secure the system-board shield to the chassis.
4. Replace the inverter (see
Replacing the
5. Replace the I/O bracket (see
6. Replace the back cover (see
7. Replace the display bezel (see
8. Replace the speaker cover (see
9. Replace the decorative cover (see
10. Replace the optical drive (see
11. Replace the computer stand (see
12. Replace the I/O cover (see
Replacing the I/O
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
13. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Inverter).
Replacing the I/O
Bracket).
Replacing the Back
Cover).
Replacing the Display
Bezel).
Replacing the Speaker
Cover).
Replacing the Decorative
Cover).
Replacing the Optical
Drive).
Replacing the Computer
Stand).
Cover).