Mitsubishi CS-35707 Owner's g Manual page 46

Using the remote control to operate VCRs, cable
boxes and other components (cont.)
_Important:
DImportant:
using your remote control to operate your Mitsubishi Audio
Products
After you set up your remote control for your A/V receiver, you can
use the remote to operate it.
O Use the select switch on the top of the remote tc choose the
CABLE layer.
O Point the remote control at the A/V receiver and press the
desired buttons.
If you are using a Mitsubishi HTS-100, you can use the
POWER, VOLUME, and MUTE buttons to operate the re-
ceiver.
If you are using a Mitsubishi HTS-300, you can use the
POWER, CHANNEL, INPUT, VOLUME, ENTFR, number (0-
9), INFO, MENU, CANCEL, AUDIO, VIDEO. ADJUST, and
MUTE buttons to operate the receiver.
If you are using a Mitsubishi M-VR400 or M-VR600, you can
use the POWER, VOLUME, number (0-9), and MUTE buttons
to operate the receiver.
If you are using the Mitsubishi M-CD500 CD changer, you can
use the PLAY, PAUSE, STOP, FF, and REW buttons to operate
the CD changer.
notes about your remote control
Sometimes manufacturers change their products, or they may use
more than one code. If this is the case, your remote may not be able
to operate your VCR or cable box.
When you replace the batteries in your remote control, the remote
usually returns to its initial setting. You may need 1;oset up your
remote again.
Operating Your TV 47