Making Administrator Password Settings; Performing System Initialization - Panasonic KX-VC300 Operating Manual

4.
Enter the length of time (0–99) in minutes until the
unit enters screen standby mode (default: 10).
Note
•
If you set "0", the unit will not enter screen
standby mode automatically. However, if
you press the remote control's [Video Out
On/Off] button, the unit will enter screen
standby mode even if "0" is set.
5.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.
Making Administrator
Password Settings
1.
Login to the administrator menu (Page 88).
•
The admin menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
3.
Use [ ][ ] to select "Password Settings" and
press [Enter].
•
The password settings screen is displayed.
Document Version 2011-04
4.
Use [ ][ ] to select the following items and enter
a password (4–10 digits):
"Current password": Enter the current password
(default: 00000000).
"New password": Enter the new password.
"Retype new password": Enter the new password
again.
Note
•
Please change the default login password
the first time the unit is installed.
•
Be sure to keep the password safe.
5.
Press [G].
•
A dialog box to confirm the changing of settings
is displayed.
6.
Use [ ][ ] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.

Performing System Initialization

1.
Login to the administrator menu (Page 88).
•
The admin menu screen is displayed.
2.
Press [ ].
•
The second page is displayed.
3.
Use [ ][ ] to select "System Initialize" and
press [Enter].
•
A dialog box to confirm the start of system
initialization is displayed.
Contacts and Settings
Operating Manual 93