For Your Safety - Panasonic KX-VC300 Operating Manual

For Your Safety

To prevent personal injury and/or damage to property,
be sure to observe the following safety precautions.
The following symbols classify and describe the
level of hazard and injury caused when this unit is
operated or handled improperly.
WARNING
Denotes a potential hazard that could result in
serious injury or death.
CAUTION
Denotes a hazard that could result in minor injury or
damage to the unit or other equipment.
The following types of symbols are used to classify
and describe the type of instructions to be
observed. (The following symbols are examples.)
This symbol is used to alert users to a specific
operating procedure that must not be performed.
This symbol is used to alert users to a specific
operating procedure that must be followed in order
to operate the unit safely.
Document Version 2011-04
WARNING
General
Follow all warnings and instructions
marked on the unit.
Power
The power source voltage of this unit is
listed on the nameplate. Only plug the
unit into an AC outlet with the proper
voltage. If you use a cord with an
unspecified current rating, the unit or
plug may emit smoke or become hot to
the touch.
Do not connect the unit to the AC outlet,
AC extension cords, etc., in a way that
exceeds the power rating of, or does not
comply with the instructions provided
with, the AC outlet, AC extension cords,
etc.
Connect the AC adaptor firmly to the
power cord, and plug the power cord
firmly into an AC outlet. Otherwise, it can
cause fire or electric shock.
Do not pull, bend, rest objects on, or
chafe the power cord, plug, and AC
adaptor. Damage to the power cord or
plug can cause fire or electric shock.
To prevent fires, electric shock, injury, or
damage to the unit, be sure to follow
these guidelines when performing any
wiring or cabling:
a.
Before performing any wiring or
cabling, unplug the unit's power cord
from the outlet. After completing all
wiring and cabling, plug the power
cord back into the outlet.
b.
Do not place any objects on top of
the cables connected to the unit.
c.
When running cables along the floor,
use protectors to prevent the cables
from being stepped on.
d.
Do not run any cables under
carpeting.
For Your Safety
Operating Manual 9