Connecting Cable Clips - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Using the Cable Holders and Cable Clips
2 Slide the ends together and push the cable holders together until you feel them snap into place (see
Figure 88).
Figure 88: Connected cable holders
ENIN004
3 Connect as many cable holders together as you need to manage your cable bundles.
4 To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.

Connecting Cable Clips

To connect the cable clips:
1 Hold two clips next to each other with the split sides facing the same way (see Figure 89).
2 Slide the connecting grooves together (see Figure 89).
Figure 89: Connecting cable clips
ENIN001A
133
BlackDiamond 8800 Series Switches Hardware Installation Guide