Connecting Cable Holders - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

BlackDiamond Cable Management
Figure 86: BlackDiamond cable holders and clips

Connecting Cable Holders

Each cable holder holds up to 12 separate cables, with 6 on each side. Connect cable holders end to end
as needed to accommodate the number of cables you need to organize.
To connect the cable holders:
1 Hold two cable holders as shown in
Make sure that one locking tab at the joint is on top and the other is on the bottom.
Figure 87: Connecting cable holders
132
Interlocking
cable holder
and cable clips
Side view
Figure 87.
BlackDiamond 8800 Series Switches Hardware Installation Guide
Cable
clips
Cable
holder
ENIN005A
ENIN003