Evaluating And Meeting Cable Requirements; Cabling Standards; Cable Labeling And Record Keeping - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Site Preparation
Figure 30: Properly Secured Rack
Brace open equipment racks if the channel thickness is less than 1/4 inch (6.4 mm).

Evaluating and Meeting Cable Requirements

This section describes requirements for the cable you should use when installing your network
equipment. It includes:

Cabling Standards

●

Cable Labeling and Record Keeping

●
Installing Cable
●
RJ-45 Connector Jackets
●
Radio Frequency Interference
●
Cabling Standards
Extreme Networks recommends using the Building Industry Consulting Service International (BICSI)
Registered Communications Distribution Designer (RCDD), which is globally recognized as a standard
in site planning and cabling. For information, go to:
http://www.bicsi.org
Cable Labeling and Record Keeping
A reliable cable labeling system is essential when planning and installing a network. Maintaining
accurate records helps you to:
Relocate devices easily.
●
Make changes quickly.
●
60
BD8800_brace
BlackDiamond 8800 Series Switches Hardware Installation Guide