BlackDiamond 8800 Series Modules
G48Xa I/O Module
The G48Xa I/O module
Figure 13: G48Xa I/O Module
Module status LEDs
The default configuration of the G48Xa module is as follows. All ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
The G48Xa module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the G48Xa module, see
page
38. For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
30
(Figure
13) has 48 1000BASE-X ports that use SPF fiber SFP connectors.
1000BASE-X
ports
ASP049A
"I/O Module LEDs" on
BlackDiamond 8800 Series Switches Hardware Installation Guide