Initial Management Access - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Initial Management Access

CAUTION
Be sure that no copper is visible between the lug and the cable insulation.
4 Crimp the lug onto the cable according to the manufacturer's specifications.
5 Insert the screws through the lug and into the grounding point on the back of the chassis.
6 Connect the other end of the wire to a known reliable earth ground point at your site.

Initial Management Access

For instructions on accessing the switch for initial management setup, see "Initial Management Access"
on page 114.
85
BlackDiamond 8800 Series Switches Hardware Installation Guide