Jenn-Air 720-0720 Use & Care Manual page 11

Attach Left Side Shelf
1. Unpack left side shelf and timer control panel. Remove two 6.
"AA" batteries and set aside. 7.
2. Remove the 4 screws from the outside edge of the timer
control panel.
3=
.......................... A
A. Remove these screws.
Align the 4 holes of the timer control panel with the 4 holes in
the side shelf. Attach the timer control panel to the side shelf
from inside the side shelf using the 4 screws removed in
Step 2. Tighten the screws.
8=
9=
Remove 3 screws from the side of the side shelf.
Attach the top of the side shelf to the grill (B) by inserting the
3 screws removed in Step 6 into the side shelf from inside the
grill hood and tighten.
Attach the bottom of the side shelf to the side panel (A) of the
grill by tightening the 2 screws inserted in the keyhole slots in
Step 5.
Attach the side shelf to the control panel (C) by tightening the
screw from the side shelf control panel to the main control
panel.
4=
5.
Install two "AA" size alkaline batteries into the back of the
timer control panel.
Loosen the 2 screws on the grill side panel and align the
bottom keyhole slots on the side shelf with the loosened
screws. Hook the side shelf onto the two loosened screws
and let the side shelf slide down so the screws are in the
narrow neck of the slots.
/\
10. Attach side shelf push bar by aligning the screw holes on the
side shelf with the screw holes in the push bar. Insert the
screws into the push bar screw holes and then into the side
shelf and tighten.
IMPORTANT: This step is meant to help with the installation,
but do not depend solely on the two screws to hold the
weight of the sear burner.
11