Delay Cook & Hold - Jenn-Air 8113P399-60 Use & Care Manual

OVEN COOKING
Cook & Hold
When using the Cook & Hold option, the oven begins to heat
immediately after the control has been set. Then, the oven
cooks for a specified length of time. When that time has
elapsed, the oven will keep the food warm for up to an hour
then automatically turn off.
To set Cook & Hold: Cook & '"_
1. Press the Cook& Hold pad. t Hold j
HOLD will flash to indicate that you are in Cook &
Hold programming.
, 00:00 will flash in the display.
2. Select the amount of time you want to cook by using the
number pads.
HOLD continues to flash.
The time will light in the display.
Time can be set from ten minutes (00:10) to 11 hours, 59
minutes (11:59).
3. Press Bake, Convect Bake or Convect Roast (select models)
and select the oven temperature. Press the Autoset pad for
350° F or the appropriate number pads. _ ..............................
(....... Bake ";
/
. The desired function word will flash. ,...........................................................
. The oven temperature can be set from 170° F to 550° F.
4. Press the desired function pad again OR wait four seconds.
The desired function word will remain lit.
The cooking time will show in the display.
The actual oven temperature will be displayed
during preheat.
The set temperature will display when the oven is
preheated.
When the cooking time has elapsed:
, Four beeps will sound.
, HOLD and WARM will light.
, 170°will display.
, Time of day will display.
After one hour in HOLD WARM:
The oven turns off automatically.
HOLD and WARM go off.
Remove food from oven.
/, ....... \
To cancel Cook & Hold at any time: (CANCEL)
Press the CANCEL pad. Remove food from oven.
Delay Cook & Hold
When using Delay, the oven begins to cook later in the day.
Set the amount of time that you want to delay before the oven
turns on and how long you want to cook. The oven begins to
heat at the selected time and cooks for the specified length of
time.
Delay time can be set from ten minutes (00:10) to 11 hours, 59
minutes (11:59).
To set a Delayed Cook & Hold cycle:
1. Press the 1 Delay pad.
2.
.
4.
5.
6.
DELAY flashes in the display.
00:00 flashes in the display. ',. Delay ,/
Using the appropriate number pads, enter the amount of time
you want to delay the start of the Cook & Hold cycle.
Press the Cook & Hold pad. ,.................................. ..................... .
/ Cook &
, HOLD and DELAY flash in the display. Hold
, 00:00 flashes in the display. " ..................................
Enter the amount of time you want to cook using the number
pads.
Press Bake, Convect Bake or Convect Roast (select models).
Set the oven temperature desired by pressing the Autoset
pad or the appropriate number pads.
. 350° will light when Autoset pad is pressed.
. After four seconds, the entered delay time
will appear in the display.
Autoset /
HOLD turns off. ".........................
l
BAKE and DELAY remain lit to remind you that
a delayed Cook & Hold cycle has been programmed.
Note:
. Do not use Delayed Cook & Hold foritemsthatrequire a
preheated oven, such as cakes, cookies, and breads.
. Do not use Delayed Cook & Hold if oven is already hot.
13
8113p399.pdf I Imported from Cleveland on 1/17/2007