Table of Contents
Advertisement
TO REPLACE DUST BIN
Turn This Direction
To Close For Use
Open
(For Emptying)
Closed
(For Use)
Replace dust bin lid assembly by placing
back on dust bin with the marks on the lid
aligned as shown under Open (For
Emptying)
on the back of the dust bin,
Rotate lid clockwise while pressing down-
ward so marks align as shown above Close
(For Use) as above,
P acedustbin
back into vacuum
_,,
cleaner by insert-
J
_f'__',_
ing the bottom first _
\'_J
and tilt back with
\
_J
the dust bin han-
\
"_
die raised.
Dust Bin
Release
Handle --
Dust
Bin--
Lower the dust
bin handle to lock
dust bin in place.
Check secondary filter frequently and clean
when dirty,
WARNING
Electrical Shock Hazard
Do not operate the cleaner without
the motor safety filter, Be sure the
filter is properly installed to prevent
motor failure
and/or electrical
shock,
Always unplug power cord from
electrical outlet before performing
any service on vacuum,
SECONDARY FILTER
Remove the dust bin as outlined in the
DUST BIN CLEANING sectionl
Remove secondary filter from vacuum
cleaner,
Secondary
Wash the secondary filter in warm soapy
water, rinse and dry thoroughly by letting it
air dry.
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace dry secondary filter. Ensure filter is
properly installed over filter opening.
Replace the dust bin as outined in the
DUST BIN CLEANING section.
15
Advertisement
Table of Contents
