Kenmore 116.32903 Owner's Manual page 10

TO STORE ATTACHMENTS
Remove dusting brush or combination
brush, Snap into appropriate storage loca-
tion.
Remove crevice tool from the wand by twist-
ing+Lay aside
Remove the extension wand from the hose+
Twist the wand to the left and pull from the
hose end
7" Lower
"/"_Wand
Unlock
)"_"- Wan d
\ Locking
._ Ring
Upper
Wand
Unlock the wand by turning the wand lock-
ing ring to the UNLOCK position+
Slide the lower wand into the upper wand+
Turn the wand locking ring to the LOCK
position.
Place the crevice tool down into the com-
pressed wand+ Snap into the appropriate
storage location,
Reinsert the hose fully into the opening on
the lower body from which it was removed,
Press firmly to assure connection,
WARNING
Personal Injury Hazard
If the power is on the agitator may
begin rotating when the hose is
inserted. Ensure that the agitator is
clear of all hands, feet, objects, etc.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose.
Property damage could result.
EXTENSION HOSE
SOME MODELS
Some models include an extra hose which
connects to the stretch hose on the vacuum
for a longer cleaning reach,
Stretch Hose ,_ Extension Hose
Insert the two tabs on the end of the
extension hose into the two "J" shaped slots
on the stretch hose and twist to cennecL
All attachments and the telescoping wand
can be attached to the open end of the
hose.
FLOOR BRUSH AND WAND
SOME MODELS
Some models have an extra brush and wand
for cleaning bare floors, Twist one end of the
adaptor into the floor brush and the other
end into the straight wand, Connect the
straight wand to the telescopic wand and
then to the vacuum hose or extension hose+
CAUTION
When using the stretch hose or with
the extension hose attached, the
cleaner should be on a solid surface
on the same level or below the level
of the user's feet. DO NOT use the
hoses when the cleaner is above the
level of the user's feet.
10