Kenmore 116.32903 Owner's Manual page 8

Table of Contents

Advertisement

OFF Position:
Step on the back half of the
pedal to turn off the agitator for use on bare
floors.
in the OFF position, the agitator does not
rotate. This setting should be used for
cleaning hardwood and tile floors.
Note: The light will remain on when vacu-
uming with the agitator in the OFF Position,
provided the vacuum is not fully upright
ON Position:
Step on the front half of the
pedal to turn on the agitator for use on car-
peting.
In the ON position, the agitator will turn,
When carpets are being cleaned the selec-
tor should be in this position.
Attention:
Refer to your carpet manufac-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the agitator turned off, to
prevent carpet damage.
E
WARNING
Personal injury Hazard
DO NOT place hands or feet under-
neath the unit when changing the
Agitator On/Off Selector to the On
position. The agitator begins to
revolve rapidly.
Crevice
Tool
Telescoping
-Stretch
Dusting
Hose
Combination
Hose
Collar
Identify each of the attachments shown
above.
TO USE ATTACHMENTS
Remove the lower end of the stretch hose
from the cleaner by grasping the hose col-
lar, twisting and pulling straight out. The
attachments can now be added to the hose.
Note: The agitator will not rotate if the hose
has been removed from the nozzle.
Note: The motor protector may open when
using attachments or when cleaning new
carpet, due to reduced airflow caused by
the attachments themselves or by new car-
pet fuzz filling the bag quickly. See the
TROUBLESHOOTING
section.
E
WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.32902

Table of Contents