Kenmore 116.32903 Owner's Manual page 9

The attached
hose swivels to
make cleaning Swivel-
easier in every
direction.
Remove the
Hose
hose from the
hose clip by
pulling straight
out,
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
_u Crevice Remove the
Tool telescoping
wand from
.Telescoping its storage
Wand position_
Remove the crevice tool from its storage
position in the wand. Locate the wand lock-
ing ring on the wand and turn the locking
ring to the UNLOCK position,
Extend the wand to its full length_Turn the
locking ring to the LOCK position, Attach
the extension wand onto the open end of
the hose.
Lower_,_ _ Suction
Wand-"_"',_"!_ Control Slide
_'_... _ Locking Ring I _"
_nlock _'_ Upper
Wand
Align the tabs on the extension wand with
the "J" slots in the hose Push the wand into
the hose and twist to the right to lock,
To achieve maximum reach
with the attachments, add the
crevice tool to the end of the
wand by inserting and
twisting slightly, Hose-
The dusting brush or the combination
brush may be attached directly to the
wand or placed on the end of the crevice
tool.
Crevice Tool
Models) L-J Brush
TO OPERATE SUCTION
CONTROL SLIDE
Telescoping Wand
When using attachments for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position, to reduce suction for
ease of cleaning. This lever is located on the
telescoping wand, close to the hose,
Note: Return
suction control
slide to the closed
position for
normal cleaning,
Suc_on
Control
Sfide
9
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach
beyond the hose stretch capability
could cause the cleaner to tip over.