On/Off Switch - Kenmore 116.32903 Owner's Manual

Release t hehandle bypressing downon
thehandle release pedal w ithyourfootand
pulling backanddown onthehandle with
yourhand.
Note:Theagitator w illnotrotate ifthevacu-
umcleaner i s in theupright p osition.
Handle
Release
Pedal
To start the vacuum cleaner, slide the
On/Off switch from the OFF position to the
ON position To stop the vacuum cleaner,
slide the On/Off switch to the OFF position
Note: This switch operates the suction
motor only. For the agitator to rotate, the
agitator On/Off selector must be in the ON
position and the handle must be released
from the upright position_
,U
To select a pile height setting:
Turn off cleaner Select a pile height setting
by tilting the cleaner back until front wheels
are lifted slightly off the floor as illustrated.
Slide the adjustment lever to the correct
setting.
SUGGESTED PILE HEIGHT SETTINGS
You may need to raise the height to make
some jobs easier, such as scatter rugs and
longer pile carpets. Suggested settings are:
HIGH: shag carpet, long pile, plush, scatter
rugs.
MED: medium to long pile.
LOW: short to medium pile,
EX LOW: very low pile.
Height
Adjustment
Lever
7
, WARNING
Personal Injury Hazard
DO NOT place hands or feet
underneath the unit when chang-
ing from the bare floor to the car-
pet pile height setting. The agita-
tor begins to revolve rapidly when
the vacuum is turned on and is in
the carpet setting.