Light Bulb Changing - Kenmore 116.32903 Owner's Manual

WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical out-
let
Light
Lefts •
Slots
Pry light lens
out at slot in
rear as shown
on both sides.
Rotate lens up
and lift off.
CAUTION
De not use a bulb rated over 15Watt
(130Volt). During extended use, heat
from the bulb could overheat sur-
rounding plastic parts.
Remove the
light bulb by
pushing the
bulb in while
turning coun-
terclockwise to
release from
the sloLThen
pull the light
bulb straight out.
To replace
the light
bulb careful-
ly insert and
turn clock-
wise to
securely fit into
slot.
Note: See PARTS AND FEATURES for bulb
number.
CAUTION
un°tmPls ugionm_ltet rely °neaUnslilth lee d,
To replace light
lens, place tabs
at front of lens
into slots, Rotate
lens down and
snap into place_
To maintain efficient cleaning, the agitator
must be kept free of carpet pile, string, or
hair build-up_ After every 7 to 10 uses,
unplug and turn vacuum over and check
agitator for string and hair build-up.
Use a scissors to remove any build-up
entangled around the agitator.
17