Kenmore 385.17630 Owner's Manual page 86

If the buttonis extremely thick,makea test buttonhole°
If it is difficult to fit the button throughthe test
buttonhole, lengthenthe buttonholeby pullingthe
buttonholderon the foot backto increase the length.
(_ Gap
How to Adjust Buttonhole Stitch Balance
Use the stitch length control 0 to adjust stitch density_
Turn the dial in direction _ for a coarser density (_.
Turn the dial in direction (_ for a tighter density (_.,
/
............................. J
If the sides of the buttonhole are not balanced, do
the following;
If the buttonhole looks like (_, move the lever
with the screw driver to the right ( + ) to make the
left side of the buttonhole less dense
(see illustration).
If the buttonhole looks like (_), move the lever
with the screw driver to the left ( - ) to make the
left side of the buttonhole denser,,
(_ Buttonhole pitch balance adjusting lever
®
AUTO BH
78