Inserting The Bobbin - Kenmore 385.17630 Owner's Manual

o Removing
the Hook Cover Plate
(_ Hook cover plate release button
(_ Hook cover plate
Slide the hook cover plate release button (_ to the
right, and remove the cover plate (_)_
[]
Inserting the Bobbin
C) End of thread
(_) Notch
(_ Notch
(_ Threading chart
Place a bobbin in the bobbin holder with the
thread running off counterclockwise..
[_ Guide the thread into the notch (_ on the front
side of the bobbin holder. Draw the thread to the
left, sliding it between the tension spring blades,.
[] Continue to draw the thread lightly until the
thread stips into the notch (_).. Pull out about 6"
(15 cm) of thread°
[] Attach the hook cover plate_ Check the threading
by referring to the chart (_) shown on the hook
cover plate,
f
[]
[]
%
[]
\
/
J
b
®
,J
24