Lace Work; Multiple Zigzag Stitch - Kenmore 385.17630 Owner's Manual

Lace Work
(_ Stitch width: 2 to 3
(_ Stitch length: 1
(_ Neeedle thread tension: 2 to 6
(_ Presser foot A: Zigzag foot
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more
elegant when trimmed with lace.
Fold the raw edge of the fabric at least 5/8"" (1.5 cm).
Place lace underneath and topstitch with blind hem
stitch. Trim excess fabric close to stitching..
_ WIDTH
f
_ LENGTH (_
®
J
Multiple Zigzag Stitch
(_ Stitch width:
(_) Stitch length:
Needle thread tension:
(_ Presser foot A:
5 to 6_5
0°5 to 1
2 to 6
Zigzag foot
[] Seam finishing
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker°
The stitch is excellent for darning and mending tears°
Place your fabric to allow a 5/8" (t .5 cm) seam_
Trim the seam allowance after sewing,
Note:
Be careful not to cut the stitches,
[_ Mending
Position the tear under the needle so that the stitch
catches both side,
f
f
>
_ WIDTH ('_
_ LENGTH (_
®
,t
J
58