Adjustingthe Volume; Reinforcing The Basssound; Selectingthe Soundmodes - JVC MX-GT90 Instructions Manual

Campact component systems
Hide thumbs Also See for MX-GT90:
Table of Contents

Advertisement

Continued
I_
Adjustingthe Volume
You can adjust the xolume lexel only while the unit is turned
on. The volume lexel can be adjusted in 32 steps (VOL MIN,
VOL 01
VOL 30, and VOL MAX).
Turn VOLUME
+ / - clockwise
(+) to
increase
the volume or
counterclockwise
(-) to decrease
it.
BL
When using the remote control, press VOLUME + to increase
the volume or press VOLUME
to decrease it.
_For
private
listening
Connect
a pair of headphones
to the PHONES
jack. No sound
comes out of the speakers.
Be sure to turn down the volume
before
connecting
or putting
on headphones.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, a
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source next time.
REMEMBER you cannot adjust the volume level
while the unit is on standby.
Toturndownthe volume level temporarily
Press FADE MUTING
on the remote control,
The volume level gradually
decreases
to
"VOL M[N,"
'lb restore the sound,
press the button again.
Reinforcing the BassSound
You can select one of the 4 subwoofer levels. This function
only affects the playback sound, but does not affect your
recording. The subwoofer level can be adjusted in 4 sleps
LEVEL 1, LEVEL 2, LEVEL 3, and LEVEL 4 (MAX
LEVEL),
'lurn SUBWOOFER
LEVEL +/-
clockwise (+) to increase the subwoofer
sound or counterclockwise (-) to
decrease it.
When using the remole control, press
SUBWOOFER LEVEL + to increase the subwoofer volume
or press SUBWOOFER LEVEL
to decrease it.
SUBWOOFER
indicator always lights up
when the unit is on.
Selectingthe SoundModes
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA
Sound Effect Amplifier
modes). This
function only affects the playback sound, but does not affect
your recording.
To select the sound
modes,
turn
SOUND
MODE
(or press
SOUND
MODE
on the remole control)
until the sound mode you want appears
on
the display.
The SOUND MODE indicator
also lights up on the display.
o,
II
t-t
11_i
II
_LLLI__
• The sound modes change as follows:
[-_(DD .C LU B-_-_ HALL -_-_STAD IUM_-,--ROCK -,,-1
ance CLUB)
I'
r
,._
_
_
.-_ .-,
POP
OFF
* /
t
t
(Canceled)
t
LMANUAL
_-
_-
.,.I
CLASSIC
3-,-_ MANUAL 2-,-_ MANUAL 1_,J
* When using the remote
control,
the sound mode
changes
in
only one way.
Surround modes **"
D.CLUB:
Increases resonance and bass,
HALL:
Adds depth and brilliance to the sound,
STADIUM: Adds clarity and spreads the sound, like in an
outdoor stadium.
SEA (Sound
Effect Amplifier)
modes:
ROCK:
Boosts low and high frequency.
Good for
acoustic
music.
POP:
Good for vocal music,
CLASSIC:
Good for classical
music.
Manual
modes:
MANUAL
1/2/3:
Your individual
mode slored in memory,
See
"Creating
Your Own Sound Mode
Manual
Mode."
OFF:
Cancels the sound mode. The SOUND MODE
indicator goes off from the display.
** Surround
elements
are added to the SEA elements
to create a
being-there
feeling
in your room.
When one of these modes
is selected,
the SOUND
MODE
While
one of the SEA modes
including
manual
modes
(SEA
elements
without
surround
elements)
is selected,
the SOUND
MODE
indicator
lights up as ............ _2/:4_;_/;
-10-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents