Basic Operations; Getting Started; Turn On The Power; Select A Source - JVC NX-SA1B Instructions Manual

Basic operations

Getting started

1

Turn on the power.

The STANDBY lamp goes off.
2

Select a source.

/
3

Adjust the volume.

• Adjustable range: MIN, 1 — 39, MAX
To turn off the System
The STANDBY lamp turns on.
To mute the volume temporarily
"MUTING" flashes.
To restore the sound, press MUTING or
VOLUME +.
/ /

Setting the clock

1
Display the clock setting screen.
The hour indication flashes on the display.
A M
• If you have already set the clock before,
press CLOCK/TIMER repeatedly until the
hour indication flashes on the display.
2
Adjust the hour.
/
(Press repeatedly)
3
Adjust the minute.
/
(Press repeatedly)
Finish setting the clock.
To correct a misentry during the process,
press CANCEL.
You can return to the previous step.
NOTE
• The clock may gain or lose 1 to 2 minutes per
month. You may need to readjust the clock
periodically.
• If there is a power failure, the clock loses its
settings. You need to set the clock again.
1 2 . 0 1 2 . 0 0
\
\
9