Playingbackcds(Cd/Cd-R/Cd-Rw); Loading Cds - JVC MX-GT90 Instructions Manual

PlayingBackCDs(CD/CD-R/CD-RW)
This unit has been designed to playback the following CDs:
• CD (Audio CD)
• CD-R (CD-Recordable)
• CD-RW (CD-ReWritable)
Continued use of irregular shape CDs
(heart-shape, octagonal, etc.) can damage
the System. x©
General Notes
In general, you will have the best performance by keeping
your CDs and the mechanism clean,
• Store CDs in their cases, and keep them in cabinets or on
shelves.
• Keep the system's disc trays closed when not in use.
Whenplayinga CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back only if they are already
"finalized."
• You can play back your original CD-Rs or CD-RWs
recorded in music CD format, (However, they may not be
played back depending on their characteristics or recording
conditions.)
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or the player's lens is dirty.
• CD-RWs may require a longer readout time, This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs,
Loading CDs
On the unit ONLY:
1
Press A tbr the disc tray @cl_
(CDI, CD2, and CD3) you _
want to load a CD onto.
_)
The unit automatically turns on and _...
the disc tray comes out.
2 Place a disc correctly on the circle of the disc
tray, with its label side up.
3
CORRECT INCORRECT
• When using a CDsingle (8 cm), place it on the inner
circle ofthe disc tray.
Press the same A you have ___c_
pressed in step I. _ _
The disc tray closes, and the ((A))
corresponding disc number lamp and _,r 1"'_
disc indicator light up on the display
(CDI, CD2, and CD3).
4
Repeat steps 1 to 3 to place other CDs.
_When loading more than one CD continuously
When you press _ for the next tray you want to place another CD
onto, the first disc tray automatically closes and then the next tray
comes out,
_About the disc indicators and disc number lamps
Each disc indicator corresponds to the disc tray of the same number.
Disc number
Disc indicator J
Disc marker
• The disc marker lights up for the disc number you have selected.
• The disc indicator flashes while the corresponding CD is being
played.
• The disc indicators goes off when the unit has detected that there
is no CD on the corresponding disc tray.
-13-