Usingsleeptimer; Timer Priority - JVC MX-GT90 Instructions Manual

Toturnon or off RecordingTimer after its setting is
done
1
2
CL_
Press CLOCK/TIMER repeatedly until /m_
"REC" appears on the display.
\-
'lb turn off the Recording Timer, press
CANCEL/DEMO.
The REC (Recording Timer) indicator goes
off from the display,
The Recording Timer is canceled, but the
setting for the Recording Timer remains in
memory,
'lo turn on the Recording Timer, press
SET/DISPLAY.
The REC (Recording Timer) indicator lights
up on the display, The settings you have done
are shown on the display in sequence For your
confirmation,
%
S_-r/DmPI.A ¥
UsingSleepTimer
With Sleep Timer, you can fall asleep to music,
You can set Sleep Timer only while the unit is turned on,
HowSleep Timer actuallyworks
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
f-N
The time length until the shut-off time k_
appears and the SLEEP indicator starts
\"
flashing on the display.
• Each time you press the button, the time length changes
as Follows:
CLEEP10 "_SLE EP20 "_SLE EP30 "_SLE EP60 "]
Canceled _ SLEEP120 _ SLEEP90
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting For these timers oxerlaps,
Here are examples.
Recording Timer has priority over Daily Timer and Sleep
Timer.
• if Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
AM 6:00 6:30 7:00 7:30
I I I I
Recording Timer L j I
I I I I
Daily Timer i
I
• If Recording Timer is set to come on while Sleep Timer is
operating, Sleep Timer will not work (the SLEEP indicator
does not go off),
PM 9:00 9:30 10:00 10:30
I I I I
Recording Timer i I ] i
I I I I
Sleep Timer i
I
not work.
2 Wait tbr about 5 seconds alter specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
'lb check the remaining time until the shut-offtime, press
)
SLEEI once so that the remaining time until the shut-ofFtime
appears for about 5 seconds.
'lb change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
'lb cancel the setting, press SLEEP repeatedly unitil the
SLEEP indicator goes off5
• Sleep Timer is also canceled when you turn offthe unit,
- 24 -