Table of Contents
Advertisement
Using t heMenus: Shooting Mode
• _.:
CustomWhiteBalance
Choose
,o, to adjust white
balance for unusual lighting
conditions.
The options
at
right will be displayed;frame
a
white object so that it fills the
monitor and press the shutter button all the way
down to measure white balance.
If"COMPLETED!" is displayed, press MENU/OKto set
white balance to the measured value. This value
is stored even when the camera batteries are
removed
and can be reselected
by pressing
MENU/OK when custom white balance options are
displayed.
If
"UNDER" is
displayed,
raise
exposure
compensation
(pg. 30) and try again. If"OVER"is
displayed, lower exposure compensation
and try
again.
% Tip
To give a deliberate color cast to your photographs,
measure a value for custom white balance using a
colored instead of a white object.
[]
CONTINUOUS
Capture motion in a series of pictures.
• - Notes
• Continuous shooting is not available in _,_ or _M
mode. N"_d T OP 12 and _H FINAL 12 are available
only in _, t,$,, _M or MS mode.
• Tile flash turns off automatically (pg. 26). Tile
previously-selected flash mode is restored when OFF
is selected for []
CONTINUOUS.
• Frame rate varieswith shutter speed.
• []
CONTINUOUS:
H_ TOP72
The camera takes up to 12 pictures while the
shutter button is pressed.
d- Note:_ TOP 12/r_,'. H FINAL 1 2
While these options are in effect, sensitivities under 400
are automatically raised to 400 or above and image
sizesover _
are set to l_ll. Settings that have been
altered from the values selected by tile userare shown
in yellow.
Tile original settings are restored when
another option is selected for []
CONTINUOUS.
70
Advertisement
Table of Contents
