Usin 9 The Tools - Hoover SteamVac FH50040 Owner's Manual

Using the tools
Attach hose
Unplug cIeaner from electrical outlet.
1. Open hose connection port (A).
2, lnsert short hose end, matching tabs on hose
with same-sized slots in connection port.
3. Push hose into port and lock in place,
4. Plug solution tube firmly into solution
connection port {B}.
To removehose
1. Squeeze latches (C) on top and bottom of
hose. Remove hose from port, Close door.
2. Remove solution tube from solution
connection port.
A
B
Optional tools
A, SpinScrub
TM
hand tool has rotating brushes
for extra scrubbing action on small carpet
areas, carpeted stairs and upholstery, For
some models, the brushes can be removed
for converting to the scrub module.
B. Stair/upholstery nozzle has a built-in
brush to help provide the scrubbing action
some spots may need for removal.
C, Scrub module with detachable scrub pad
attaches to the base of the SpinScrub
TM
hand
tool (in place of brash module). Can be used
to scrub stubborn areas such as scuff marks,
dried spills, and in hard to reach areas on
hard surfaces.
D. Crevice Tool can be used to dean along
edges of carpet, carpeted stairs and on
upholstery.
SpinScrub
TM
hand tool
(Optional)
To rein ove the
SpinScruU" hand
tool pull tool down
and outward.
To reposition the
tool, reverse this
procedure,
How to reattachtool cover
The tool cover is
designed with a
break-away feature
which allows it to
snap flee
if it is
pushed open too
far.
To reattach, align
hinges of cover ,with
holes on sides of tool
storage area. Snap
door into place.
www.hoover.com 18