Restoring The Factory Defaults - Zoom GFX-1 Operation Manual

Restoring the Factory Defaults

The GFX-1 comes with 40 recommended patches (factory default
patches). Even if you overwrite any of these patches, you can restore the
original contents of the patch at any time.
There are two ways of restoring factory defaults. "All Initialize" returns
the entire set of patches to the original condition. "Factory Recall"
restores a specific patch to the original condition.
1. While holding down the STORE key, turn the unit
on.
The indication "AL" flashes on the display.
■ To perform All Initialize
2. Press the STORE key once more.
All patch settings are returned to the factory default condition, and the
unit switches to play mode. To cancel All Initialize, press the VALUE
[-] key.
NOTE
All user-created patches will be lost when performing All Initialize. Use this
function with care.
■ To perform Factory Recall
2. Use the BANK [W]/[Q] keys and the foot
switches [1] - [4] to select the patch you want to
return to the original condition.
The specified bank and patch number flashes on the
display.
3. Press the STORE key once more.
The settings of the specified patch are returned to the factory default
condition.
If desired, repeat steps 2 and 3 to restore other patches. To terminate the
Factory Recall operation, press the VALUE [-] key. The unit will switch
to the play mode at this point.
A L
C 2
ZOOM GFX-1 21