Listening To The Ipod Or Iphone - Sharp XL-HF200P (BK Operation Manual

Muting
The volume is muted temporarily when pressing the MUTE button on the
remote control. Press again to restore the volume.
X-Bass control
When the power is fi rst turned on, the unit will enter the extra bass mode
which emphasises the bass frequencies, and "X-BASS" will appear. To cancel
the extra bass mode, press the X-BASS button on the remote control.
Bass control
1
Press the BASS/TREBLE button to select "BASS".
2
Within 5 seconds, press the VOLUME (+ or -) button to adjust the bass.
Treble control
1
Press the BASS/TREBLE button to select "TREBLE".
2
Within 5 seconds, press the VOLUME (+ or -) button to adjust the treble.
Equalizer
When the EQUALIZER MODE
button is pressed, the current
mode setting will be displayed. To
change to a different mode, press
the EQUALIZER MODE button
repeatedly until the desired
sound mode appears.
Function
When the FUNCTION button on main unit is pressed, the current function will
change to different mode. Press the FUNCTION button repeatedly to select
desired function.
CD FM STEREO
Audio In
Line In
Note:
The backup function will protect the memorised function mode for a few hours
should there be a power failure or the AC power lead becomes disconnected.

Listening to the iPod or iPhone

iPhone and iPod operations
Made for:
iPhone 3GS
iPhone 3G
iPhone
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPod with colour display
iPod mini
Flat Equalizer off.
Game For game.
Classic For classical music.
Pops For pop music.
Vocal Vocals are enhanced.
Jazz For jazz.
FM MONO AM
iPod USB
Caution:
Please update your iPod unit to the latest software version from Apple's
homepage before using it.
Notes:
Once the iPod or iPhone is connected to the unit it will begin
charging.
Error message "This accessory is not made to work with iPhone"
may appear on the iPhone screen when iPhone battery is low.
The message "This accessory is not made to work with iPhone"
or "This accessory is not supported by iPhone" may appear on
the iPhone screen when the iPhone is not properly docked (eg.
slanting) on this product. If this occurs, please remove and re-dock
the iPhone.
This product is made for iPhone. To prevent random interference
when iPhone is docked, the headphone output is disabled.
You may also experience brief audio interference during
incoming calls.
iPod and iPhone adaptor connection
Notes:
Please use the adaptor supplied with your iPod or iPhone unit.
You can use an audio cable to connect your iPod to the AUDIO IN
socket if:
1.
your iPod adaptor does not fi t into the iPod dock on the main
unit.
2.
you have an iPod that does not have an iPod adaptor.
3.
you have an iPod that does not have an iPod 30 pin connector.
iPhone Adaptor iPhone
No. Description
12 iPhone
15 iPhone 3G
15 iPhone 3GS
To insert iPod or iPhone adaptor
1
Open the iPod cover by pulling up.
2
Insert the iPod or iPhone adaptor into unit and
or iPhone.
iPhone (bottom)
Dock connector
iPhone adaptor
iPhone dock
iPhone connector
Caution:
Unplug all accessories from the iPod or iPhone before inserting it into
the dock.
E-4
Capacity
4GB & 8GB & 16GB
8GB & 16GB
16GB & 32GB
connect your iPod
iPhone