Advanced Usb Playback; Listening To The Radio - Sharp XL-HF200P (BK Operation Manual

Advanced USB playback

The following functions are the same as CD
operations:
Direct track search ........................................................ 6
Repeat play .................................................................... 6
Random play .................................................................. 6
Programmed play .......................................................... 7
Note:
If USB memory device is not connected, "USB No Media"
will be shown on the display.
Notes:
This unit only supports "MPEG-1 Audio Layer-3"
format. (Sampling Frequency is 32, 44.1, 48kHz)
Playback order for MP3 fi les may differ depending on
the writing software used during fi le download.
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
For MP3/WMA fi les, please put ".MP3" ".WMA"
extension. Files cannot be played back if there is no
MP3/WMA extension.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to
32 characters.
Maximum total number of MP3/WMA fi les is 1024.
Maximum total number of folders is 255 inclusive of
root directory.
The display playback time may not be displayed
correctly when playing back a variable bitrate fi le.
The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during fi le playback or pause mode.
WMA meta tag also supports title, artist and album
name which are recorded in WMA fi les. Copyright
protected WMA fi les cannot be played back.

Listening to the radio

1
2
Page
3
Notes:
To receive an FM stereo transmission:
You can store 40 AM and FM stations in memory and
recall them at the push of a button. (Preset tuning)
1
2
3
4
5
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
RRMCGA232AWSA
1
E-9
Tuning
Press the ON/STAND-BY button to turn the power on.
Press the TUNER (BAND) button repeatedly to select
the desired frequency band (FM or AM).
Press the TUNING (
control to tune in to the desired station.
Manual tuning:
Press the TUNING (
to tune in to the desired station.
Auto tuning:
When the TUNING (
for more than 0.5 seconds, scanning will start
automatically and the tuner will stop at the fi rst
receivable broadcast station.
When radio interference occurs, auto scan tuning may
stop automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
button again.
Press the TUNER (BAND) button to select stereo
mode and "ST" indicator will be displayed. "
will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND)
button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes
clearer.
Presetting a station
Perform steps 1 - 3 in "Tuning".
Press the MEMORY button.
Within 30 seconds, press the PRESET (
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
Within 30 seconds, press the MEMORY button to store
that station in memory. If the "MEMORY" and preset
number indicators disappear before the station is
memorised, repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
To recall a preset station
Press the PRESET ( or
seconds to select the desired station.
or ) button on the remote
or ) button repeatedly
or ) button is pressed
or
" and " "
or ) button
) button for less than 0.5
)