Maintenance - Sharp XL-HF200P (BK Operation Manual

Maintenance

Cleaning the CD pickup lens
In order to ensure proper operation of the CD player,
preventative maintenance (cleaning of the laser pickup
lens) should be performed periodically. Lens cleaners are
commercially available. Contact your local CD software
dealer for options.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Specifi cations
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specifi cation
changes for product improvement without prior notice. The
performance specifi cation fi gures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
General
Power source
Power consumption
Dimensions
Weight
CD player
Type
Signal readout
D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range
Amplifi er
Output power
Output terminals
Input terminals
E-14
AC 120 V ~ 60 Hz
40 W
Width: 215 mm (8 - 1/2")
Height: 90 mm (3 - 1/2")
Depth: 300 mm (11 - 4/5")
4.0 kg (8.8 lbs.)
Single disc multi-play compact
disc player
Non-contact, 3-beam
semiconductor laser pickup
Multi bit D/A converter
90 dB (1 kHz)
RMS: 100 W (50 W + 50 W)
(10% T.H.D.)
RMS: 66 W (33 W + 33 W)
(1% T.H.D.)
Speakers: 4 ohms
20 Hz - 20 kHz
Subwoofer Pre-out (audio
signal):
200 mV/10 kohms at 70 Hz
Video output: 1 Vp-p
Headphones: 16-50 ohms
(recommended: 32 ohms)
Audio In (audio signal):
500 mV/47 kohms
Line in (Analogue input):
500 mV/47 kohms