Setting The Clock (Remote Control Only); Ipod And Iphone; Listening To The Ipod Or Iphone - Sharp XL-DH330PH Operation Manual

General control (continued)
■ Treble control
1
Press the BASS/TREBLE button to select "TREBLE".
2
Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
■ Equaliser
When the EQUALIZER MODE button is pressed, the current
mode setting will be displayed. To change to a different mode,
press the EQUALIZER MODE button repeatedly until the
desired sound mode appears.
FLAT
GAME
CLASSIC
POPS
VOCAL
JAZZ
■ Function
When the FUNCTION button on main unit is pressed, the
current function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
FM STEREO
CD
AUDIO IN iPod
Note:
The backup function will protect the memorised function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
Setting the clock (Remote control
only)
In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the MEMORY button.
Press the or button to select 24-hour or 12-hour
display and then press the MEMORY button.
The 24-hour display will appear.
"0:00"
(0:00 - 23:59)
The 12-hour display will appear.
"AM 12:00"
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
"AM 0:00"
(AM 0:00 - PM 11:59)
No equalization.
Equaliser off.
For rock music. For game.
For classical music. For classical music.
For pop music. For pop music.
Vocals are enhanced. Vocals are enhanced.
For jazz. For jazz.
FM MONO AM
USB
4
To adjust the hour, press the
press the MEMORY button. Press the
once to advance the time by 1 hour. Hold it down to
advance continuously.
5
To adjust the minutes, press the
then press the MEMORY button. Press the
button once to advance the time by 1 minute.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will appear
for about 5 seconds.
Note:
The "CLOCK" will appear or time will be displayed when the
AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does
not appear in step 2, step 3 (for selecting the 24-hour or 12-
hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Factory
reset, clearing all memory" on page 21 for details.]
2
Perform "Setting the clock" from step 1 onwards.

Listening to the iPod or iPhone

iPod and iPhone operations
Made for:
● iPhone 3GS
● iPhone 3G
● iPhone
● iPod touch (3 rd
generation)
● iPod touch (2 nd
generation)
st
● iPod touch (1
generation)
● iPod classic
● iPod with video
● iPod nano (5 th
generation)
● iPod nano (4 th
generation)
● iPod nano (3 rd
generation)
● iPod nano (2 nd
generation)
● iPod nano (1 st
generation)
● iPod with colour display
● iPod mini
Caution:
Please update your iPod and iPhone unit to the latest software
version before using it. Please visit Apple's homepage to
download the latest version for your iPod and iPhone.
Notes:
● Once the iPod or iPhone is connected to the unit it will
begin charging.
● Error message "This accessory is not made to work with
iPhone" may appear on the iPhone screen when iPhone
battery is low.
● The message "This accessory is not made to work with
iPhone" or "This accessory is not supported by iPhone"
may appear on the iPhone screen when the iPhone is not
properly docked (eg. slanting) on this product. If this
occurs, please remove and re-dock the iPhone.
● This product is made for iPhone. To prevent random
interference when iPhone is docked, the headphone
output is disabled.
You may also experience brief audio interference
during incoming calls.
E-6
or button and then
or button
or button and
or