Sharp XL-HF200P (BK Operation Manual page 8

Listening to a CD or MP3/WMA disc (continued)
Notes:
If you press the button during random play, you can move to the track
selected next by the random operation. On the other hand, the
does not allow you to move to the previous track. The beginning of the
track being played will be located.
In random play, the unit will select and play tracks automatically. (You
cannot select the order of the tracks.)
Caution:
After performing repeat play, be sure to press the
Otherwise, the disc will play continuously.
Programmed play (CD)
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press the MEMORY button on the remote
control to enter the programming save mode.
2
Press the or buttons on the remote control to select the desired
track.
Selected track number
3
Press the MEMORY button to save the track number.
4
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed.
If you want to check the programmed tracks, press the MEMORY button
repeatedly. If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
5
Press the (CD/USB
Programmed play (MP3/WMA)
1
Whilst in the stop mode, press the MEMORY button to enter the
programming save mode.
2
Press the PRESET ( or
the desired folder.
Then press the or button on the remote control to select the
desired tracks.
3
Press the MEMORY button to save the folder and track number.
4
Repeat steps 2 - 3 for other folder/tracks. Up to 32 tracks can be
programmed.
5
Press the (CD/USB
(CD/USB ) button.
) button to start playback.
) button on the remote control to select
) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the (CD/USB ) button. The display
will show "Memory Clear" and all the programmed contents will be cleared.
button
Adding tracks to the programme:
If a programme has been previously stored, the "MEM" indicator will be
displayed. Press the MEMORY button repeatedly to go to the last programme
memory. Then follow steps 2 - 3 to add tracks. The new tracks will be stored
after the last track of the previous programme.
Notes:
When a disc is ejected, the programme is automatically cancelled.
If you press the ON/STAND-BY button to enter the stand-by mode or
change the function from CD to another, the programmed selections will
be cleared.
During the programme operation, random play is not possible.
Procedure to playback MP3/WMA disc
with folder mode on
To play back CD-R/RW.
1
Press the CD button, and load an MP3/WMA disc. Press the FOLDER
button and disc info will be displayed.
MP3 indicator
Total number of folder
2
Press the PRESET (
(Folder mode on)
FOLDER
indicator
FOLDER number
3
Select desired fi le to be played back by pressing the
4
Press the
will be displayed.
Title, Artist and Album name are displayed if they are recorded on
the disc.
In case of playback with the folder mode on, press the PRESET
( or ) button, and the folder can be selected even though it is in
playback/pause mode. It will continue playback/pause mode in the
1st track of the selected folder.
Display content can be changed by pressing the DISPLAY button.
File name display
Counter display
Album display
Note:
If "Not Support" is displayed, it means "Copyright protected WMA fi le" or "Not
supported playback fi le" is selected.
E-7
WMA indicator TOTAL indicator
Total number of fi les
or ) button to select desired playback folder.
First track number in the folder
(CD/USB ) button. Playback will start and fi le name
Artist display
or button.
Folder display
Title display