Installation - EverFocus EHD525EX Operation Instructions Manual

Power Source
Power Consumption
Dimensions
Weight
Operating Temperature
Certifications
DIMENSIONS

INSTALLATION

1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1).
Carefully uncap the housing cover as the direction shown below (Figure 2), please pay
attention not to damage the lens. To remove the housing cover, push the hinges to the
bottom of the bracket, the hinges can be easily removed from the bracket.
12VDC/24VAC
24VAC: 6VA max. (Heater OFF)
24VAC: 20.5VA max. (Heater ON)
12VDC: 4W max. (Heater OFF)
12VDC: 11.5W max. (Heater ON)
130mm(W) x 98.8mm(H) x 130mm(D);
5.1"(W) x 3.9"(H) x 5.1"(D)
1.7kg ; 3.7lbs
-40°C~50°C ;- 40°F~122°F (20%~80% Humidity)
FCC/CE
3
Figure 2