Alarm Feature “B” Programming - Autopage RF-350 Installation & User Manual

ALARM FEATURE "B" PROGRAMMING:
1 Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2 Push the Valet switch 5 times and hold in on the 5
long chirp is heard, release the valet switch. You are now in the
Alarm feature 'B' programming mode.
3 Press the transmitter button corresponding to the feature you want to
program.
One Chirp / LED
Press
one pulse
Transmitter
Factory Default
Button
Setting
Pathway
1
illumination
feature "off"
Ignition
2
controlled door
locks & unlocks
3
0.8-second Door
lock pulses.
nd
2 Channel
4
Pulsed
5
+
Button =
Silent Arm/Disarm
H2/8 Gray Wire =
6
+
Trunk (Channel 2)
Output
Horn chirp
7. +
Duration
Standard
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps will confirm exit.
Three Chirps /
Two Chirps /
LED three
LED two pulses
pulses
Parking light Parking light
turns "on" for turns "on" for
30- second 30- second
upon an unlock upon an unlock
signal signal & 10-
second upon a
lock signal.
Ignition Ignition
controlled door controlled door
locks only unlocks only
3.5-second Double pulse
Door lock pulse. unlock
nd
2 Channel
Momentary
rd
Button = 3
Channel Aux.
H2/8 Gray Wire =
Two Step Door
Unlock Output
Horn chirp Horn chirp
Duration Duration
50 mS
30 mS
7
th
push. When a
Four Chirps /
LED four pulses
Without ignition
controlled door
locks & unlocks
Comfort feature
Horn chirp
duration
10 mS