After Use; Other Safety Warnings - Yard-Man YM90BC Operator's Manual

• A coasting blade can cause injury while it continues to spin
after the engine is stopped or the throttle trigger is released.
Maintain proper control until the blade has completely
stopped rotating.
• Do not run the unit at high speed when not cutting.
• If you strike or become entangled with a foreign object, stop the
engine immediately and check for damage. Have any damage
repaired before attempting further operations. Do not operate
unit with a bent, cracked or dull blade. Discard blades that are
bent, warped, cracked or broken.
• Do not sharpen the cutting blade. Sharpening the blade can
cause the blade tip to break off while in use. This can result
in severe personal injury. Replace the blade.
• Do not use the cutting blade for edging or as an edger; severe
personal injury to yourself or others may incur. Use the cutting
blade only for the purpose described in this manual.
• Stop the engine IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect thoroughly for
loose nuts, bolts or damage before continuing. Repair or
replace affected parts as necessary.
AFTER USE
• Clean cutting blades with a household cleaner to remove any
gum buildup. Oil the blade with machine oil to prevent rust.
• Lock up and store the cutting blade in an appropriate area to
protect the blade from unauthorized use or damage.
OTHER SAFETY WARNINGS
• Never store a fueled unit inside a building where fumes may
reach an open flame or spark.
• Allow the engine to cool before storing or transporting. Be
sure to secure the unit while transporting.
• Store the unit in a dry area, locked up or up high to prevent
unauthorized use or damage, out of the reach of children.
• Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean after
each use, see Cleaning and Storage instructions.
• Keep these instructions. Refer to them often and use them
to instruct other users. If you loan someone this unit, also
loan them these instructions.
SAVE THESE INSTRUCTIONS
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the
operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used
in conjunction with other symbols Or pictographs,
Read the operator's manual(s) and follow all warnings
and safety instructions. Failure b do so can result in
serious injury to the o_rator and/or bystanders.
WARNING= Thrown objects and loud noise can
cause severe eye injury and hearing !oSS. Wear eye
protection meeting ANSI Z87:1 standards and ear
protection when operating this unit. Use a fu!! face
AlwaYs use clean, fresh unleaded fuel
)
.OIL
Refer to opeiator!s manualfor the proper type of
oil.
AWAY
_z'_;_ WARNING: Keep all bystanders, especially
children and Pets, at least 50 feet (!5 m)fro m the
operating area.
BRUSHCUTTERS : REPLACE DULL BLADE
Do not sharpen the cutting blade. Sharpening the
blade can cause the blade tip to break off while in
use. This can result in severe personal injury.
SYMBOL MEANING
I • ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
• HOT SURFACE WARNING
Do not touch a hot muffler, gear housing or cylinder.
You may get burned. These parts get extremely hot
from operation. They remain hot for a short time after
the unit is turned off.
-- .w-._ • Q • THROWN OBJECTS AND ROTATING CUTTER
/7_"Ik CAN CAUSE SEVERE INJURY
/._ w WARNING: Do not operate without the cutting
/
/." _ attachment shield in place. Keep away from the
--_P" _ rotating cutting attachment.
• TRIMMER/BRUSHCUTTER SAFETY
,_ __ WARNING: Thrown objects and rotating cutter can
_, _ cause severe injury. Keep bystanders, especially
_d children and pets, at least 50 feet (15 m) away
_m from the cutting area. The cutting attachment
_ shield must be used when using the trimmer
_gattachment.