Handwheel; All Controls - Craftsman 113.198251 Operator's Manual

Handwheel
The handwheel controls the height of the
radial arm.
To raise the radial arm, turn the handwheel
clocle, vise. To lower the radial arm, turn the
handwheeI counterclockwise. (Figure 52)
Fig. 52 - Handwheel
One complete turn of the handwheel moves
the arm 1/16 inch.
The handle can be folded in by pushing the
red button while pushing the handle in.
All Controls
Always lock the miter, swivel and bevel locks
before making a cut on your radial arm saw.
When ripping, the rip lock must also be lock-
ed. When crosscutting, the rip Iock should be
locked before and after each cut, when the
saw is in the rearmost position.
22