Hitachi XP P9500 User Manual page 295
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (574 pages) ,
- User manual (188 pages)
Table of Contents
Advertisement
Message ID
KAPL01054-W During the offline operation
processing of the HDLM
command, a path that cannot be
placed in the Offline(C) status
was detected. PathID = aa...aa
Would you like to continue the
processing of the offline
operation? [y/n]:
KAPL01055-I
All the paths which pass the
specified aa...aa will be changed
to the Offline(C) status. Is this
OK? [y/n]:
KAPL01056-I
If you are sure that there would
be no problem when all the
paths which pass the specified
aa...aa are placed in the
Offline(C) status, enter y.
Otherwise, enter n. [y/n]:
KAPL01057-I
All the paths which pass the
specified aa...aa will be changed
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Message Text
Messages
Explanation
Details
A path that cannot be set to
Offline(C) was detected during
multi-path offline processing. To
ignore this path and perform
offline processing for the next
path, enter y. To cancel offline
processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue processing
the offline operation of the
HDLM command for other paths,
enter y. If you want to terminate
processing, enter n. For details on
the offline operation, see
(Places Paths Offline) on page
6-6.
Details
Multiple paths will be collectively
set to Offline(C) because the -hba
or -cha parameter was specified.
To collectively set multiple paths
to Offline(C), enter y. To cancel
the operation, enter n.
aa...aa: CHA port or HBA
Action
If you want to execute offline
processing for the paths that meet
the specified requirements, enter
y. If you want to terminate
processing, enter n.
Details
This message re-asks the user
whether they want to set all the
paths to Offline(C). To set all the
paths to Offline(C), enter y. To
cancel the operation, enter n.
aa...aa: CHA port or HBA
Action
If you want to execute offline
processing for the paths that meet
the specified requirements, enter
y. If you want to terminate
processing, enter n.
Details
Multiple paths will be collectively
placed Online because the -hba
offline
8-13
Advertisement
Table of Contents
