Hitachi XP P9500 User Manual page 115

15 After the installation finishes, execute the dlmprsvkey utility with the -v
.
parameter specified.
Execute the following command:
HDLM-installation-folder\bin\dlmprsvkey -v
Make sure that the PRSV key displayed by the dlmprsvkey utility is
unique among all the other hosts in the SAN. If the PRSV key is not
unique or is not registered, or if the KAPL09131-W message appears,
execute the dlmprsvkey utility with the -r parameter specified to re-
register the PRSV key. If the PRSV key is not registered, the HDLM
functions might not properly operate. For details about the dlmprsvkey
utility, see The dlmprsvkey Utility for Registering an HDLM Persistent
Reservation Key on page
If you used a license key file, it will be deleted after the installation
finishes. The KAPL09115-W message will appear if deletion of this file
fails. If this happens, delete the file manually.
16 Shut down the host.
.
Leave the host in a single-path configuration until you check (in step 24)
whether HDLM has been successfully installed.
17 On all the hosts that make up the cluster system, perform steps 3 to 16.
.
18 Make sure that all the hosts that make up the cluster system have been
.
completely shut down.
19 Restart each host.
.
20 Log on to Windows again as a member of the Administrators group.
.
21 Make sure that the program is running properly, by examining the results
.
of the dlnkmgr command's view operation.
An example of executing the dlnkmgr command's view operation is as
follows:
>dlnkmgr view -sys
HDLM Version
Service Pack Version
Load Balance
Support Cluster
Elog Level
Elog File Size (KB)
Number Of Elog Files
Trace Level
Trace File Size(KB)
Number Of Trace Files
Path Health Checking
Auto Failback
Remove LU
Intermittent Error Monitor
HDLM Manager Ver
Alive x.x.x-xx
HDLM Alert Driver Ver
Alive x.x.x-xx
HDLM Driver Ver
Alive x.x.x-xx
License Type Expiration
Permanent -
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for Windows(R))
7-12.
: x.x.x-xx
:
: on(extended lio)
: off
: 3
: 9900
: 2
: 0
: 1000
: 4
: on(30)
: on(1)
: off
: off
WakeupTime
yyyy/mm/dd hh:mm:ss
WakeupTime
yyyy/mm/dd hh:mm:ss 128
WakeupTime
yyyy/mm/dd hh:mm:ss
ElogMem Size
3-49