Hitachi XP P9500 User Manual page 223

Parameter and
program
information to
be displayed
Expiration
-audlog Audit Log
Information
about audit log
data collection
settings
Audit Log
Category
#
When the HDLM manager starts, HDLM cluster servers are automatically
recognized.
Examples
Example 1
The following example shows how to display information about the HDLM
function settings:
Hitachi Dynamic Link Manager User Guide (for Windows(R))
Item
License expiration:
• When using a permanent license: -
• When using a temporary license or
emergency license: The license expiration
period is displayed in the format: yyyy/mm/
dd(ndays after). When the view -sys -
lic operation is executed, (ndays after)
appears if there are n days left until the
license period expires.
For example, when there are 100 days left
until the license period (2006/08/21) expires,
the following appears:
2006/08/21(100days after)
Settings for audit log data collection:
• Whether collection is enabled:
on: Enabled
off: Disabled
• Audit log data collection level:
When audit log data collection is on, the
collection level that has been set is displayed
within the parentheses following on. The
collection level indicates a severity level. A
value from 0 to 7 is displayed as the
collection value.
The categories of audit log data to be output are
displayed. When more than one category is
displayed, commas (,) are used as separators.
ss: StartStop
a: Authentication
ca: ConfigurationAccess
If all the above categories are specified, all is
displayed.
If the collection of audit log data is disabled, a
hyphen (-) is displayed.
Command Reference
Description
6-35