The Dlmhostinfo Utility For Checking Hdlm Installation Information; Format; Parameters - Hitachi XP P9500 User Manual

-h
Displays the format of the dlmchkpath utility.
If you do not specify any parameters, a warning message will appear.
The dlmhostinfo Utility for Checking HDLM Installation
Information
This utility either displays HDLM installation information from the command
prompt or outputs the information to a file. Installation information refers to
the installation directory and the version. If HDLM has not been installed, no
installation information is output.
This utility is in the following locations:
HDLM-installation-folder\bin
and
drive-where-the-installation-DVD-has-been-inserted:\HDLM_Windows
\DLMTools
#
Use this utility only in an environment where the version of the installed
HDLM and the version on the DVD are the same.

Format

dlmhostinfo [-output installation-information-file | -h]

Parameters

-output installation-information-file
Outputs the installation information to the specified file. If the specified
file already exists, the installation information will not be output.
Example:
-h
Displays the format for running the dlmhostinfo utility.
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
Specifying the -output parameter:
>dlmhostinfo -output installation-information-file
KAPL13801-I The dlmhostinfo utility for confirming HDLM
installation information completed normally.
[Contents of installation-information-file]
"installDirectory","C:\Program Files\Hitachi
\DynamicLinkManager"
"version","x.x.x-xx"
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
7-15