Hitachi XP P9500 User Manual page 206
Hitachi dynamic link manager software user guide for windows (6.6) (hit5201-96006, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (450 pages)
Table of Contents
Advertisement
-elfs error-log-file-size
Specify a value from 100 to 2000000 (KB) for the size of the error log
files. The target log files for which a file size can be set are HDLM
manager logs (dlmmgrn.log (n indicates a file number from 1 to 16)) and
HDLM GUI logs (dlmguin.log (n indicates a file number of 1 or 2)). For
HDLM GUI logs, the valid file size range is from 100 to 9900. If you
specify a value of 9901 or more, 9900 will be used. The specified value is
used for HDLM manager logs.
When combined with the specification for the number of error log files,
the maximum total size of error log files that can be collected is
32000000KB (approximately 30GB).
When the size of all the log files in a log file group reaches their maximum
value, the new log data will overwrite the existing log data, starting with
the oldest log data.
-elfn number-of error-log-files
Specify the number of error log files. Specify a value from 2 to 16.
When combined with the specification for the error log file size, the
maximum total size of error log files that can be collected is 32000000KB
(approximately 30GB).
Only the number of files for HDLM manager logs (dlmmgrn.log (n
indicates a file number from 1 to 16)) can be set. For HDLM GUI logs
(dlmguin.log (n indicates a file number of 1 or 2)), the number of log
files is set at 2.
-systflv trace-level
Specify the trace output level.
The trace files for which trace levels can be set are hdlmtrn.log (n
indicates a file number from 1 to 64).
Table 6-4 Trace Level Values on page 6-18
level. The default is 0. If an error occurs, set the trace level to 1 or higher
to collect the log information.
6-18
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
>
Table 6-4 Trace Level Values
Value
Does not output any trace.
0
Only outputs error information.
1
Outputs a summary of program operation.
2
Outputs details of program operation.
3
Outputs all information.
4
Command Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
shows the values of the trace
Description
Advertisement
Table of Contents
