Procedure For Executing The Dlmpr Utility In Vcs Environments - Hitachi XP P9500 User Manual

6 Execute dlmpr -c.
.
From the displayed list, enter the path ID where KeyCount is not 0. A
confirmation message is displayed twice. Check the message and enter y.
The persistent reservation is cleared. Repeat the procedure until
KeyCount for all the paths is changed to 0. The following shows what
happens when executing this utility.
>dlmpr -c
PathID PathName
ReservedKey
000000 0001.0000.0000000000000000.0000
ExclusiveAccessRegistrantOnly
000001 0001.0000.0000000000000000.0001
ExclusiveAccessRegistrantOnly
KAPL10655-I Specify the PathID of the LU for which you want to
clear persistent reservation information. (To cancel, press the
x key):0
KAPL10656-I The persistent reservation information of PathID = 0
will be cleared. Is this OK? [y/n]:y
KAPL10657-I If you continue this process, the reservation of the
LU you specified will be cleared. Please confirm that no other
servers are accessing this LU.
[y/n]:y
KAPL10658-I The persistent reservation information of PathID = 0
was cleared.
KAPL10640-I The dlmpr utility completed normally.
7 Choose Start, Settings, Control Panel, double-click Administrative
.
Tool, and then double-click Computer Management.
8 Choose Services and Applications, and then double-click Services. A
.
list of services is displayed. From the list, right-click Cluster Service, and
then choose Properties. Select Automatic from the Startup type combo
box in the General tab, and then click the OK button.
9 In the Computer Management window, choose Device Manager. From
.
the View menu, select Show hidden devices. Right-click Cluster Disk
Driver from Non-Plug and Play Drivers on the right window, and
choose Enabled.
A message prompting you to restart the system is displayed. Choose Yes.
The system will restart and the Cluster Disk Driver will be enabled.
10 Make sure that MSCS starts correctly.
.
11 Restart all the other hosts from among the hosts that make up the MSCS
.
system.

Procedure for Executing the dlmpr Utility in VCS Environments:

1 Start one host from among the hosts that make up the VCS system.
.
2 Stop the VCS.
.
3 Execute dlmpr -d.
.
4 Execute dlmpr -c.
.
5 From the displayed list, enter the path ID where KeyCount is not 0. A
.
confirmation message is displayed twice. Check the message and enter y.
Type
Utility Reference
Hitachi Dynamic Link Manager User Guide (for Windows(R))
KeyCount
1 200000E08B1059EC
1 200000E08B1059EC
7-11