Configuring New Zoning For A Fabric - HP Surestore 64 - Director Switch User Manual

Configuring New Zoning for a Fabric

Use the following tasks to configure a new zone and zone set, then activate the new zone
set for the fabric. Steps are provided in each task to show you how to use dialog boxes and
other features of fabric zoning.
All features to configure zones and zone sets are available through the Zone Sets dialog box
to display this dialog box, choose Zone Sets from the Configure menu.
Task 1: Create Zones
A zone is a set of physical ports on managed products in the fabric and/or devices attached
to the ports. Ports are identified by the managed product domain and physical port
member. Devices are identified by the WWN of the device. Use this task to define and add
up to 1024 zones.
To create zones, perform the following steps:
1. In either the Topology View or Zoning View, choose Zone Sets from the Configure
menu.
The Zone Sets dialog box displays.
The Zone Set Library area of the Zone Sets dialog box displays all of the defined zone
sets. If zone sets are not defined, this library is empty. Click the horizontal magnifying
glass icon by a zone set to expand the list of zones included in the set. Click the vertical
magnifying glass icon by a zone to expand the list of members included in the zone.
Configuring and Managing Zoning 67