Figure 31
Zone Set to be Activated Dialog Box
4. The Zone Set to be activated dialog box displays the directors or switches that will be
affected by activating the zone set. You can view the directors' or switches' WWNs,
product names, or network addresses, by changing the View by selection.
Note
If the operating mode is set to Open Fabric Mode and you activate a zone set
that was configured by portID, a message displays stating, "XYZ zone was
configured by portID but will actually be enforced by WWN in Open Fabric
Mode".
5. Click OK.
The Activate Zone Set dialog box displays.
76
Configuring and Managing Zoning