Activate Zone Set Dialog Box - HP Surestore 64 - Director Switch User Manual

Figure 32

Activate Zone Set Dialog Box

6. Click Start to begin the activation.
Messages appear in the Status area indicating the progress of the command. Buttons
on the dialog box disable until the process is complete.
When the process is complete, the Start button changes to a Close button.
7. Click Close to close the dialog box.
8. If you are finished activating zones, click Close on the Zone Sets dialog box.
Once you activate a zone that was configured by port ID, an alert message will display in
the Zoning View, as shown in Figure 33 on page 78.
Configuring and Managing Zoning 77