Handset And Loudspeaker Volume; Ringing Signal Volume - Ericsson Dialog 3213 User Manual

Programming and Adjustments
Program
( 0 - 9 )
Program
70
Programming of ringing signal tone character
There are 10 different programmable ringing signal tone characters on
your telephone, each corresponding to a digit between 0 and 9.
Note: If you use melodies to signal incoming calls, this will
replace the tone character. See section "Melody ringing".
Press
The current tone character is displayed.
Press the corresponding digit
The telephone rings with the chosen character.
Press to finish programming

Handset and loudspeaker volume

Use the volume keys to change the volume of the handset or
loudspeaker during a call. Adjust handset listening volume in
handset mode. Adjust loudspeaker volume in monitor mode.
Press to change the volume

Ringing signal volume

Use the volume keys to adjust the ringing signal volume
when the telephone is idle or ringing. Adjusted volume is stored.
Press to change the volume
Dialog 3213