Sharp FO-DC500 Facsimile Operation Manual page 197

NO CONF. FUNCTION
NO PAPER
ONHOOK DIAL MODE
OUTPUT TRAY OFF
PAPER JAM
RCVD CONF. FAX
REMOVE ORIGINAL(S)
SIZE ERROR
REPLACE TONER
WAITING<MEMORY FULL>
Confidential transmission was cancelled because
the receiving machine does not have a
confidential function, a confidential passcode is
not programmed in it, its memory is full, or it is not
a Sharp model.
This indicates that you are out of paper. If the
machine has multiple paper sources, the message
will be followed by the paper source (or sources)
that is out of paper in parentheses. If no paper
source is indicated, all paper sources are out of
paper.
The SPEAKER key has been pressed and the
machine is waiting for you to dial.
The received document tray is not attached.
Attach it as explained in Connections in Chapter 1
(the tray must be attached for the machine to
operate properly.)
The printing paper is jammed. See the following
section, Clearing Paper Jams .
A confidential fax has been received in memory.
Print the fax as explained in Confidential
Operations in Chapter 6.
The original document is jammed. See the
following section, Clearing Paper Jams .
This message will be followed by one of the paper
sources in parentheses, and informs you that the
paper loaded in that source is not all the same
size.
The toner cartridge must be replaced.
The memory has become full and scanning has
stopped during scanning of a multi-page
document. Scanning will automatically resume
when sufficient memory becomes free (for
example, after several pages are transmitted).
Messages and Signals
195